Facot: BANDS WITH BONDING PLATES

Products

Application Sector

Pipes and ducts

BANDS WITH BONDING PLATES

Technical Details

It is a roller band with separate bonding plate for the corrosion proofing protection of underground and external steel pipelines. Once it has been applied, it protects the steel sublayers and the main pipeline coatings (such as polyethylene, bituminous coating or epoxy substances).

Instruction for Use

Rolls: Cut a piece of band according to the pipe diameter, following the relevant table. Clean and degrease well the surface. Preheat the tube at 50 – 60 °C, apply the band after heating one edge until it adheres to the pipe surface. Heat the other edge and apply it overlapping the first edge. Cut the band according to the joint width and apply the bonding plate overlapping the jointing point. Heat the whole surface in a regular way as to eliminate any wrinkle or air pockets, up to the band total thermoshrinkage. Kit: Ready-to-use sized-up cut bands. Apply them as above specified.

Code	Contents	U.M.	Qt.	pz/pallet
FAP0300	BAND rolls H 300 mm x 30 m	n.	1
FAP0450	BAND rolls H 450 mm x 30 m	n.	1
FAP0600	BAND rolls H 600 mm x 30 m	n.	1
FAPKIT150/450	KIT DN 150 L. 450 mm, DE 159 mm	n.	1
FAPKIT200/450	KIT DN 200 L. 450 mm, DE 219 mm	n.	1
FAPKIT250/450	KIT DN 250 L. 450 mm, DE 273 mm	n.	1
FAPKIT300/450	KIT DN 300 L. 450 mm, DE 325 mm	n.	1
FAPKIT350/450	KIT DN 350 L. 450 mm, DE 377 mm	n.	1
FAPKIT400/450	KIT DN 400 L. 450 mm, DE 426 mm	n.	1
FAPKIT450/450	KIT DN 450 L. 450 mm, DE 508 mm	n.	1
FAPKIT500/450	KIT DN 500 L. 450 mm, DE 529 mm	n.	1
FAPKIT550/450	KIT DN 550 L. 450 mm, DE 610 mm	n.	1
PC0300	BONDING PLATE rolls H 300 mm x 15 m	n.	1
PC0450	BONDING PLATE rolls H 450 mm x 15 m	n.	1
PC0600	BONDING PLATE rolls H 600 mm x 15 m	n.	1